WlzProductTransform

Mapping and Analysis CD | WlzProductTransform

Usage: WlzProductTransform [-A] [-R] [-1] [-2] [-ffilename1] [-Ffilename2] [-3] [-i] [-I] [-x#] [-y#] [-z#] [-s#] [-a#] [-b#] [-u#] [-v#] [-w#] [-h] [-v] [< bibfile1 >] [< bibfile2 >]

      Find the product transform for the given bibfiles.
      Bibfile data from stdin is also read and fitted in
      as per the command line arguments i.e. if filename1
      or bibfile1 are defined then it will be transform 2
      otherwise transform 1. If both transforms are defined
      on the command line then stdin is ignored.
      The transform entered as arguments assume degree angles
      and will be applied after transform 1 or 2.

Options are:
      -A       calculate absolute transform(default)
      -R       calculate relative transform
      -1       transform 1 is relative (def: absolute)
      -2       transform 2 is relative (def: absolute)
      -3       command-line transform is 3D
      -a       Rotation about the z-axis.
      -b       Rotation about the y-axis.
      -i       Invert: reflect about the y-axis.
      -I       Inverse: output the inverse of the product.
      -s       Scale factor.
      -u       Shear strength.
      -v       Shear angle in x-y plane.
      -w       3D shear angle.
      -x       Column (x) translation.
      -y       Row (y) translation.
      -z       Plane (z) translation.
      -h       Help - prints this usage message
      -V       verbose operation

back to index

Web page contact: genexweb@hgu.mrc.ac.uk

Last modified:

24/6/2003