WlzRawToWlz

Mapping and Analysis CD | WlzRawToWlz

Usage: WlzRawToWlz [-b] [-d#] [-l] [-o#,#,#] [-u] [-h] [-v] < width > < height > [planes] < type > [< raw-data file >]

      Convert the given raw data to a woolz image.
      Input can be from standard input, the width,
      height and type are mandatory parameters.
      Width and height must be integer > 0
      Type must one of:
            1: integer (32-bit signed)
            2: short (16-bit signed)
            3: unsigned byte
            4: float (
            5: double
            6: unsigned 32-bit integer
            7: unsigned 16-bit integer
            8: signed byte
      The output type will be a suittable woolz grey-type
      selected to hold the data if possible - unsigned int
      may result in loss of data

Options are:
      -b       big-endian byte ordering (default)
      -d< dimensions > image dimensions (2 or 3)(default 2)
            If d=3 then planes must be specified
      -l       little-endian byte ordering
      -oxoff,yoff,zoff x, y, z offsets (default 0,0,0)
      -h       Help - prints this usage message
      -v       verbose operation

back to index

Web page contact: genexweb@hgu.mrc.ac.uk

Last modified:

24/6/2003